Desoutter CVI II Controller Control unit Screwdriver control with Angle Screwdriver

Desoutter CVI II Controller with Angle Screwdriver

Manufacturer: Georges Renault (Desoutter)
Controller: CVI II
Angle Screwdriver: 01C11200

CVI II Controller
From simple start-up processes to complex sequence applications - with up to 20 phases and 250 cycles - for optimal speed, accuracy and operator comfort for every connection.

The control unit has various interfaces, including an Ethernet port, an RS232 port and 7 logic inputs as well as 8 logic outputs (24 volts).

The CVI II control can be used to control a hand-held electric tool from the ER series or a stationary mounted screw spindle from the EM series.

It is important to note that the CVI II can also be used in combination with a torque-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive.

Storage capacity
Between 2,500 and 8,500 screw results per station depending on the number of cycles and operating mode (asynchronous or synchronous).

Tightening strategies
- Torque and angle monitoring
- Angle and torque monitoring
- Torque and angle monitoring
- Torque and angle rate
- Prevailing torque
- Yield point
- Residual torque
- Torque and angle
- Detection of the plastic zone of the connection
- Additional torque and angle sensors
- Self-tapping
- Current monitoring

Connectable tools:
Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles

Dimensions (L x W x H): 400 x 400 × 330 mm
Weight: 30 kg

You can find more new and used articles in our shop! International shipping costs on request!